skip to Main Content
当前位置:
»
»
»
0.69 ” OLED, 96×16, SSD1306BZ IC,14PIN

0.69 ” OLED, 96×16, SSD1306BZ IC,14PIN

SCE069001-V01是一款COG型,96×16分辨率,SSD1306BZ IC,接口I2C,14PIN的OLED显示器

SKU: SCE069001-V01
Type: OLED显示屏
Mode: -
Product No.: SCE069001-V01
Size: 0.69''
Resolution: 96×16
Outline Dimension: 26.3*8*1.227
Active Area: 17.26*3.18
Interface: I2C
IC: SSD1306BZ
Brightness: -
Touch Screen: No
View Direction: -
Pin No.: 14
Shape: 方形

DESCRIPTION

General Specification

ITEM SPECIFICATIONS  UNIT
  MODULE SIZE 26.3(W)x8.0(H)x1.227(D) mm
  VIEWING AREA 18.86 (W) x 4.78(H) mm
  ACTIVE AREA 17.26 (W) x3.18(H) mm
  DOT SIZE 0.16(W) x0.18(H) mm
  DOT PITCH 0.18(W) x0.20 (H) mm
  ASSY.TYPE COG
  WEIGHT TBD

Interface Definition

PIN NO. SYMBOL TYPE FUNCTION DESCRIPTIONS
1 C2P C1P/C1N-Pin for charge pump capacitor. C2P/C2N-Pin for charge pump capacitor.
2 C2N Connect to each other with a capacitor. They must be floated when the
3 C1P I Charge pump not use.
4 C1N
5 VDDB P Power supply for charge pump regulator circuit.
It must be connected to external source when charge pump is used. It must be float when charge pump is not used.
6 NC I Reserved pin. It should be kept NC.
7 VSS P Ground pin. It must be connected to external ground.
8 VDD P Power pin for logic circuit. It must be connected to external source.
9 RES# I Hardware reset input pin. Active “L”.
10 SCL I I2C interface clock wire
11 SDA I I2C interface data wire
12 IREF I Current reference for brightness adjustment.
This is segment output current reference pin. A resistor should be connected between this pin and VSS .Set the current at 12.5 uA maximum.
13 VCOMH O COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
14 VCC P Power supply for OLED driving voltage. A capacitor should be connected between this pin and VSS, when charge pump is used.
It must be connected to external source when charge pump is not used.
Back To Top